Environmental Friendly Dead Livestock Disposal Reaction Kettle
Overview
Weifang Zhite Environmental Protection Technology Co.,Ltd. sets scientific research and development, engineering design, installation, debugging, production services for the integration of domestic comprehensive backbone enterprises, products with free-pollution disposal equipment, garbage disposal equipment, high concentration wastewater treatment equipment, organic fertilizer production equipment, air treatment equipment, sludge treatment equipment, automobile processing equipment such as environmental protection equipment . And can design according to customer demand, customization of all kinds of efficient and practical equipment and production line.
Working process
1. Raw materials (dead animals) comes into play after disinfection, into the automatic bin, closed continuous conveying to the crusher, the negative pressure drainage the stench gas.
2. Raw material crushing: raw material after broken into 20-30 mm block, the hermetic screw conveyor machines were transported into the system after the sewage cleaning equipment, there are negative pressure drainage into the machine, do not produce secondary pollution.
3. High temperature system: the dry process system, and the total consumption of time is short, 120 min.Processing center temperature 140 ºC or higher pressure acuity 0.35 MPa (absolute pressure), the holding 30 to 40 minutes, discharge way to discharge under pressure to automatically send material to squeeze on the buffer tank, to press for the use of material automatically.
4. Press: the sterilization curing materials are squeezing degreasing, separation of oil-water mixture, reduce the solid content of moisture and fat content, oil can be used as biological diesel oil and chemical oil raw material, the protein secondary water into the dryer dry recovery.
5. Dryer, dry slag press cake, make the moisture content of 10% or less, so that the packing storage, can be used as organic fertilizer.
6. Cooling: materials for drying after cooling.
7. Exhaust: machine, dryer to discharge waste gas, through indirect condensation, drug spray filter processing standards.
The product yield analysis
Ingredients: ill pigs, chickens
Cope product yield, yield 33%, or less moisture 10% or less,
Oil yield: A, pig 15% or less,
B, chicken 12% or less.
The processing method of advantages:
1. This process compared with the original dry chemical system all-in-one, reduce monomer equipment specifications, single class comprehensive production capacity increase, separate system, dry, make the equipment working efficiency.New technology of using high temperature and high pressure treatment to kill germs, more thoroughly, processing more convenient and quick.
2. Raw material after broken into 20-30 mm block, cut space, easy to cure even completely.
3. New technology of using discharge under pressure to save time and effort, the decrease of the intermediate links pollution;Protein expression after the separation of water is not outside, into the dryer, not cause secondary pollution to environment,
4. The new process is to kill livestock and poultry contains harmful bacteria, can be made into organic fertilizer and chemical raw materials, waste to improve economic efficiency, fundamentally solve the problem of dead livestock and poultry to market.
5. After the new process does not produce secondary pollution, no pollution to the environment.
6. According to user's different farming scale, equipment specification but can small, single class 2 -- 10 tons of can design and manufacture.Equipment cover an area of less, 10 tons/disposal equipment, 800 square meter workshop;The factory covers an area of 20,000 square meter;Low consumption, each dealing with only 380 yuan a ton of dead animals.
Form a complete set of equipment
1.Animal carcasses hoist
| Overview: |
| Animal carcasses crusher equipment, mainly used for animal carcasses resource recycling in the production of organic feed, animal carcasses crusher is high, the resulting material delivery problem. |
| Usage: |
| Animal carcasses hoisting machine, mainly for the harmless treatment plant, the tilt of bodies of animals that large farms and other departments, vertical elevator. |
| Features: |
| With a large amount of ascension, strengthen degrees higher advantages, as well as feed and stop automatically by the control circuit to realize automation function. |
2.Animal carcasses crusher
| Overview: |
| TLX type animal carcasses crusher with high efficiency, energy saving, intelligent and reliable. This device is a coarse fine crushing integrated machine , The two Crushing ingenious merged, this is the first in China .Animal carcasses can be broken to the desired size by this equipment in one time. |
| Usage: |
| Mainly applied to 20mm below crushing operations, widely used in harmless treatment plants, farms ,large-scale whole pig, whole cow's broken. |
| Features: |
1.Unique crushing way, movable knife, knife set and durable.
2.For tougher animal leather material,using special tools, wear sharp.
3.Unique device designed to prevent leather wrapped blade.
4.High-power motor drives, high efficiency, low energy consumption.
5.Can be equipped with lifting devices, direct automatic feed, save labor.
6.Can achieve full PLC control, easy operation, low maintenance costs. |
3.Screw conveyor
| Overview |
| Type ZTHB series screw conveyor is a closed circular cross section of the casing, using rotating spiral blade material continuously push conveyor equipment. |
| Suitable: |
Suitable for conveying various powder, granular, small block, loose materials such as clay powder, coal powder, cement, sand, grain, small lump coal, pebbles and cast iron scraps, etc.
This product is especially suitable for the concrete mixing station from the warehouse to the blender or from cement warehouse to cement mixture machine between the bulk cement transportation. |
| Unsuitable: |
| Not suitable for conveying big viscosity, easy to agglomerate, has bad material. |
| Features: |
1.Compact structure, small cross-sectional area, light weight, good seal performance.
2.High transmission efficiency, flexible process arrangement, packing and unpacking, mobile convenience, safe in operation.
3.Screw conveyor configuration level, tilt and combination form of light, and can be used with other conveying devices, complete the processing, distribution, mixing, dehydration, housekeeping, ingredients, unloading, storage, etc. |
4. High efficiency cooker
| Overview: |
| For the waste of raw materials (sick livestock, animal carcasses) through high temperature and pressure process, achieve the defuse to effect, sterilized,the device is suitable for medium-sized slaughterhouses, farms and cities harmless treatment centers.Entire drying process can be both in a sealed environmental conditions, there will be no gas discharged in the external environment, will not cause secondary pollution, the drying process without any pollutant emissions, good drying plant health conditions. |
Features:
1.The device is equipped with door safety interlock system, safety valve, pressure control and other safety devices, safe and reliable performance.
2.The device large heating area, heating up quickly, dramatically shortening the wet time, save energy, meet national standards.
3.The device saves energy and low daily operating costs, high profit. |
| Working principle: |
| Using the spindle and the outer jacket in steam, increasing heat transfer area of equipment, make the tank pressure, the raw material of high temperature curing, the mixing uniform rotation, make the material into powder, curing the sterilization effect. |
| Connection mode |
| The use of mixing bin delivery. |
5.Oil press
| Overview: |
| Applied to animal carcasses in disposal equipment working process, after the animal carcasses crusher dead pig, dead cattle, dead chickens, dead ducks and other body oil extraction for recycling use. |
| Features: |
1.The aircraft performance is superior, the residual oil rate is low, service life long, the price is reasonable, squeezing is wide.
2.Wearing parts is made of high quality steel after carburizing heat treatment, prolong the service life, reduce the user operation cost and maintenance time.
3.Using new big modulus helical gear transmission, improve the transmission efficiency, reduce the energy consumption.
4.Reasonable pressing chamber design, improve the efficiency of oil.
5.Perfect the factory before grinding, testing procedures, improves the ease of oil mill |
This production line still have a lot of other equipment to form a complete set, not in the list, such as coolingt tower,Automatic air device,Fully intelligent suction pump,Multi-function packing machine,etc.according to custome's needs, OEM accepted. Just contact us,we will give you a detailed production technology parameters.
Advantage:
Environmental treatment equipment is to handle all the dead animal bodies through effective sterilization, high temperature and high pressure by way of high temperature drying.These process will dry the object,and then grindthe object by the shredder so as to achieve the waste recycling utilization efficiency to complete.
What We Have
· China Leading Producing Technology
· Super High Quality
· Competitive Price
· Big Production Ability
· Fast Delivery
· Excellent Sale and After-sale Service
FAQ
1.Are you a factory or trading company?
We are a company specializing in the production of various kinds of shredding machine, crusher, excrement and urine processor for the equipment manufacturers.
2. service network
The service network is Distributed in national regions and form a complete set of supporting offices, formed a sound service network, the user services will be in place in 48 hours, convenient and efficient.
3.pre-sale service
According to user requirements, we will offer a variety of designs; help the user to select the most appropriate equipment; More for the sake of users, to design a floor plan for the users, and also a reasonable configuration.
4. installation and debugging
Company has experienced professional technicians and senior workshop technicians for free on-site training of buyer's operators and responsible for the guidance of equipment installation, guarantee the operation of the equipment, and to achieve the desired effect.
5.On-site service
Since the date of installation, the company will send an engineer for on-site guidance, to supply a timely solution of equipment normal state can not run, which due to the unskillful operators who are not familiar with our machine, and guide the users to grasp the solution of the problems during using the equipment.
6.after-sales maintenance
Since the date of Qualification adjustment, one year warranty, guarantee the quality of the product if non-users artificially, my company free repair. Since the end of the product warranty period, the supplier provide maintenance service for life, and should be paid to provide accessories, appropriate preferential charge for repairs. The supplier upon receipt of buyer's notification of the equipment failure, maintenance personnel can be arrived at the scene within 48 hours.
7.operation training
Detailed work instructions, professional and technical personnel on-site guidance operation; Regular training for each operator, to make them truly knowledgeable, systematic and professional.
8.Where are you? Can we go to China and visit your factory?
Yes, of course. We are in Weifang, China. Welcome to our factory.
Company emphasizes "based on environmental protection", depending on science and technology, quality as the first productive force, to optimize the environment and save resources. The company has a number of experienced engineers class talent, for research and development in the industry for many years, for all kinds of environmental protection equipment, etc. With good design, research and development of production experience. Company set up an independent technology research and development centers, with a number of national patents with independent intellectual property rights and proprietary technology, adopt completely the computer aided design and technology of the management process, tries to use the best quality, the optimal philosophy for customer service!
All equipment produced by our company can customize according to customer's requirements.
Factory pictures
Contact us :
MOB:+86-189-5366-0555
PHONE:+86-536-337-5858
FAX:+86-536-333-0966
Web site:http://chinashredderfactory.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}