Hospital Medical Waste Treatment equipment with microwave and shredder
1.This equipment can handle medical waste such as medical infection,injury and pathology , and carry out harmless disposal of medical waste .
2.Equipment integrated design , a full set of equipment low energy consumption , automatic operation , simple operation , anytime and any where treatment of medical waste ,fixed ,mobile can be customized according to demand , convenient and flexible.
3.Microwave disinfection treatment sys tem is an integrated equipment , the equipment at least by qutomatic feeding unit ,airtight bin unit ,multi-function airtight crushing unit , negative pressure pumping unit ,microwave disinfection sterilization bin unit ,automatic contorol unit ,waste gas treatment unit 10units and alarm system.
| NO. |
System unit |
Item |
Technical Parameters |
| 1 |
Hoisting System |
Model |
ZT-MWT-3000 |
ZT-MWT-5000 |
ZT-MWT-10000 |
| Garbage can |
660L |
660L |
660L |
| Power sourece |
4 kw hydraulic system |
4 kw hydraulic system |
4 kw hydraulic system |
| Material |
Stainless steel |
Stainless steel |
Stainless steel |
| 2 |
Stock bin |
Volume |
1.2 m³ |
1.2 m³ |
1.2m³ |
| Material |
Stainless steel |
Stainless steel |
Stainless steel |
| Eccentric swage |
Equipped |
Equpipped |
Equipped |
| 3 |
Crushing system |
Power |
22kw |
30kw |
30kw |
| Blade |
Φ345*30 D550 |
Φ345*30 D550 |
Φ345*30 D550 |
| 4 |
Sterilization |
Power |
2.2kw |
3kw |
3kw |
| Chamber size |
530-5000 |
530-6000 |
530-8500 |
| Microwave generator |
1.5kw*8 |
1.5*10 |
1.5kw*20 |
| 5 |
Discharge screw |
Power |
3kw |
3kw |
3kw |
| 6 |
Main boday dimension (excluding hoist and discharge screw) |
7000*2900*2650 |
8000*2900*2650 |
10500*2900*2650 |
| 7 |
Supporting facility |
Steam generator ,water chiller,water softener, electric control box,exhaust equipment (optional),etc |
| 8 |
Total power |
97kw |
130kw |
176kw |
| 9 |
Total weight |
11000kg |
13000kg |
15000kg |
| 10 |
Capacity(t/d) |
3 |
5 |
10 |
The process of microwave disinfection of medical waste:
1.the medical waste transfer box is transported to the medical waste disposal center to the standard trash bin in the medical waste feeding area; the automatic feeding module automatically sends the medical waste in the standard medical waste bin to the closed silo through the closed feeding bin, and the negative pressure to prevent the overflow of harmful substances.
2. Multi-function crushing module will reduce the amount of internal medical waste crushing treatment, Into small pieces of medical waste (about 5cm); Small pieces of medical waste will automatically enter the spiral microwave disinfection and sterilization chamber through the screen;
3.The spiral microwave disinfection sterilization chamber has a uniform module, Mix small pieces of medical waste in the spiral microwave sterilization chamber; The spiral microwave disinfection warehouse warehouse is provided with the microwave disinfection treatment unit, Generate the electromagnetic waves of the corresponding frequency wavelength;
4.Steam heating system is installed next to the microwave disinfection and sterilization chamber, Send the high temperature pressure steam into the microwave disinfection and sterilization chamber through the steam pipeline; Under the interaction of the high-temperature electromagnetic waves of the pressure vapor and the corresponding frequency wavelength, Complete the disinfection and sterilization of medical waste.
Equipment characteristics
1.Energy Saving:Microwave heating is uniform,no energy loss,high energy,strong penetration of the object,instantaneous penetration into the object,good energy saving effect,take the daily processing .
2.Low operating temperature and slow heat loss; if microwave and the ordinary heating have the same amount of sterilization effect,the temperature on the object is obviously lower than that of ordinary heating.Waste after microwave sterilization,no residue,light damage.
3.Non-selective effect on organisms:microwave has the same effect on organisms without selectivity,and its wide spectrum of bacteria can kill all kinds of microorganisms and pathogens.
4.Microwave sterilization requires a small working environment and occupation area,the surrounding environment does not constitute high temperature,clean and hygienic.
Technical characteristics
1.Microwave disinfection technology uses microwave disinfection time short,fast speed,strong penetration,uniform temperature inside and outside,energy saving,good disinfection effect,
2.In the microwave field,the cell structure is destroyed,and the balance of internal and external substances is destroyed,resulting in cell death.
3.The combination of microwave and water vapor makes the disinfection effect more effective.
4.Microwave disinfection technology does not produce dioxins and odorous gases,no wastewater discharge.
| Mobile microwave Medical waste treatment equipmet |
Microwave Medical Waste Disinfection Vehicles Equipment |
Small Microwave Medical Waste Disinfection Equipment |
| Heavy waste crusher |
incinerator |
Single shaf shredder |
Our customer About us
ZHITE Environmental Protection Technology Co.,Ltd.is a comprehensive domestic enterprise with integrating scientific research and development,engineering design,Production and installation and commissioning services.
The main products are medical waste treatment equipment ,diseased livestock and poultry harmless treatment equipment ,household waste treatment equipment,kitchen waste treament equipment,kitchen waste treatment equipment,tall vegetable treatment equipment,sludge treatment equipment and all kinds of shredding equipment and other solid waste treatment products.
Also can design and customize all kinds of efficient and practical equipment and production lines according to customer needs.
Quality in mind ,quantity in hand !High aspiration,long-term quality!We remain true to our original aspiration and forge ahead!Better Qaulity!----Our pursuit forever!
FAQ
1.Are you a factory or trading company?
We are a company specializing in the production medical waste treatment ,shredders, coposter manufacturers.
2. Samples are available?
Yes, the sample for your test quality.
3. The product test before shipping?
Yes, all the equipment before delivery to commissioning, there is no problem of equipment to the factory.
4. After sale service?
For most of the machines, the quality is guaranteed for one year since the date of shipment except wearing parts, we supply the on-line service for all the machines, and also supply the spare parts all the time with cost price, for some complicated machine or plant, we can send our engineer overseas too.
5. How do you guarantee I can receive the goods that ordered after make the payment?
Please be rest assured that you will receive the goods in time, we are a legally established company supervised by the government, and is registered in customs of China and China Chamber of International Commerce. Besides, we are the golden member of MADE IN China. COM and has been checked by the third party as the real and legal company.
6. How to make the payment?
Normally, when the order value is below USD10, 000, we accept the payment by T/T or Western Union or Cash, L/C will be accepted when the order value is over USD10, 000. For T/T, the customer can choose 100% in advance or 30% in advance, and pay the 70% balance before shipment.
7. I want to know more about your company and your products, how?
We will sent you a catalugue as well as a questionaire which covers your requiement. Your kindly reply about filling the questionaire will be greatly appreciated.
8.Where are you? Can we go to China and visit your factory?
Yes, of course. We are in Weifang, China. Welcome to our factory.
){kind=link}