Microwave Medical Sterilizer Sterilization Equipment for Hospital Waste

• After-sales Service: 24 Hours Service
• Warranty: 1year
• Condition: New
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: ZTMCW-20
• Certification: QS, FDA, ISO, CE, SGS
• Automation: Automatic
• Screw: Single-Screw
• Treatment: Microwave
• Product Name: Microwave Medical Sterilizer Sterilization
• Model: Ztmcw-20
• Material Structure: Stainless Steel
• Processing(Kg/Batch): 5000
• Temperature Range: 60-200 C
• Power Consumption(Kw/H): 117 Kw
• Sterilizing Humidity: 30-100%Rh
• Size(mm): 8355X2866X3310
• Weight(T): 13
• Subject Range: Medical Waste
• Application: Hospital Garbage Treatment
• Microwave Energymicrowave Energy Leakage: 5MW Per Cm2
• Usage Field: Steam Sterilization
• Index Meaning: Sterilizing System
• Key Words: Virus Sterilizer
• Transport Package: Steel Rope Fasten
• Specification: ZTMCW-20
• Trademark: ZTHB
• Origin: Shandong, China
• HS Code: 8419200000
• Production Capacity: 10 Sets / Month
• Package Size: 2000.00cm * 1500.00cm * 1800.00cm
• Package Gross Weight: 2000.000kg

Product Description

Microwave Medical Sterilizer Sterilization Equipment for Hospital Waste

Brief Introduction
ZTMCW type medical waste microwave disinfection equipment is used for harmless disposal of medical waste. The disposal scope is infectious, injurious and pathological wastes (except for human limbs and organs) in medical waste. It can also deal with dead poultry in case of epidemic.
MDU series products are designed as an automatic operation system with minimum operator operation, with the following characteristics:
1. Energy saving: microwave heating is uniform, no energy loss, high energy, strong penetrability to the object, and can penetrate into the object instantly, with good energy saving effect.
2. Low operating temperature and slow heat loss: if microwave and ordinary heating produce the same amount of disinfection effect, the temperature on the object is significantly lower than that of ordinary heating. Microwave disinfection waste, non-toxic, no residue, light damage.
3. No selectivity for biological action: microwave has the same effect on all organisms but no selectivity. It has a wide spectrum of disinfection bacteria and can kill all kinds of microorganisms and pathogens.
4. The working environment and floor area required for microwave disinfection are small, which will not cause high temperature and polution to the surrounding environment.
5. environmental: no acid gas, dioxin and other pollutants.

Process steps
(1) Feed
The medical waste collected and  sent to the crushing device by the feed lifting device. As the door of the crushing device needs to be opened during the feeding process, in order to prevent the infectious substances from escaping  after the medical waste is crushed, the feeding lifting device is equipped with self-locking isolation doors. When the self-locking isolation door is not closed, the door of the crushing device cannot be opened.

(2) Broken
The medical waste can be broken into pieces of about 1 CM by using low-speed shearing crushing machine, so as to achieve shape destruction, volume reduction and guarantee the effect of subsequent treatment. After crushing treatment, the waste can be reduced by about 80%.

(3) Material transportation
The screw conveyor can transport the waste fragments in the storage tank to the disinfection and sterilization room.

(4) Disinfection and sterilization cabin
The disinfection and sterilization room adopts stainless steel pressure vessel , internal mixer and feeding valve on the top. At  Feeding, the feeding valve is closed, then the steam is started, and the microwave device and agitator are started at the same time. Because of the function of microwave, the steam in the disinfection room can be saturated without pre vacuumizing, so as to ensure the treatment effect. This is also the advantage of the equipment over the simple steam disinfection equipment. Under the joint action of steam and microwave, the temperature of the sterilization room rises rapidly. When the pressure is more than 0.2bar and the temperature is more than 135 ºC, it enters the sterilization stage and the timer starts to count. After that, the temperature continued to rise to 140 ºC, the pressure increased to 0.33mpa, and maintained at this temperature and pressure for 3-5 minutes.

(5) Discharge
Spiral conveyor is used to transport the medical waste after treatment to the outside of the equipment

(6) Tail gas purification
In order to prevent the infectious substances from escaping after the package of medical waste is damaged, the crushing device is operated under negative pressure. The extracted gas is purified by the tail gas filtration system
Equipment photos

Technical Parameters

No.	System Unit	Item	Technical Parameters	Remark	Brand
		Model	20kg		Zhite
1	Feed bin	Volume	100L	By density 0.1	Zhite
		Material	Stainless steel + alloy steel
2	Crushing System	Power	5.5kw		SEW, NORD, Guomao, same quality Or above brands
		Blade	Rotating disc thickness 20mm	High strength, high hardness	Import from Germany
		Rotate speed	>1000r/min
3	Microwave sterilization unit	Microwave generator	1.5kw*2set		Panasonic, Toshiba, Samsung, LG, same quality or above brand
		Cooling Type	Air/water cooled
		Biological indicator	The killing rate of Bacillus subtilis black variant spores is above 99.99%
		Volume and weight reduction rate	Reduce volume by 80% and weight by 20%
4	Control system	Manual/automatic	The disinfection process is traceable and records can be printed out or stored on an SD card		Zhite
5	Overall size(mm)		2000*1500*1800
6	Power source		3 phase 380V
7	Corollary Equipment		Steam generator, chiller, water softener, tail gas treatment	Optional

Other Product

 

 

 

 

Customer visit

 

FAQ
1. How do you guarantee I can receive the goods that ordered after make the payment? 
Please be rest assured that you will receive the goods in time, we are a legally established company supervised by the government, and is registered in customs of China and China Chamber of International Commerce. Besides, we are the golden member of MADE IN China. COM and has been checked by the third party as the real and legal company

2. How to make the payment? 
Normally, when the order value is below USD10, 000, we accept the payment by T/T or Western Union or Cash, L/C will be accepted when the order value is over USD10, 000. For T/T, the customer can choose 100% in advance or 30% in advance, and pay the 70% balance before shipment. 

3. Date of delivery? 
We will arrange the production and shipment as soon as possible when we received the deposit, and update the information with the customer on line. 

4. Suitability of motor? 
As there are many voltage standards in different countries in the world, so the original motor equipped on the machine would not suitable to be used with the customer's local power supply, when this situation happened, please send us your exact information of the power supply available, then we can modify the motor accordingly. 

5. After sale service? 
For most of the machines, the quality is guaranteed for one year since the date of shipment except wearing parts, we supply the on-line service for all the machines, and also supply the spare parts all the time with cost price, for some complicated machine or plant, we can send our engineer overseas too. 

6. Packaging & Shipping
All the goods exported are packed in wooden case or carton with export standard except naked package when necessary. 
We have our own professional shipping company which could deliver the goods to every corners in the world with safety and speed, and aslo can supply the services of solving the problems occured during the transaction, such as customs cleaning. 
Why choose us
1. Are you manufacturer?
Yes, we are manufacturer with more than 15 years' experience.
2. Can you ship the machine to my address?
Yes, we could use DHL to express the machine. While transport cost will be higher than by sea. 
3. Where are you? Can we go to China and visit your factory?
Yes, of course. We are in Shandong, China. Welcome to our factory.
4. Do you have manual with the machine?
Yes, of course. It is in English version.
5. Can you offer us the necessary paper to do the customs clearance?
Yes, of course. We will send you the commercial invoice, sales contract, 
packing list, bill of lading(FOB or CFR, CIF terms), insurance policy (if CIF terms), also CO if you need.

Factory pictures