Incinerator for Dead Animal/Pets/Living Garbage/Medical Waste/Marine Waste
|FOB Price:||US $10,000-50,000 / set|
|Min. Order:||1 set|
|Min. Order||FOB Price|
|1 set||US $10,000-50,000/ set|
|Transport Package:||with Wooden Box|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: ZTFS-20-60
- Certification: SGS, ISO
- Treatment: Burning
- Model: Ztfs-20-60
- Processing(Kg/Batch): 20-60
- Power Consumption(Kw/H): 2-5
- Size(mm): 2200*1300*2300
- Subject Range: Medical Waste,Dead Animals,etc.
- Specification: ZTFS-20-60
- HS Code: 8417809090
- Condition: New
- Automation: Semi-Automatic
- Product Name: Incinerator for Dead Animal/Pets/Living Garbage
- Burning: Chicken/Duck/Goose/Bird/Waste/Medical Waste,etc.
- Volume(M3): 3.0
- Fuel Consumption(L/H): 3-12
- Weight(T): 4-8
- Trademark: ZTHB
- Origin: Shandong, China
1. This equipment is a kind of suitable for the hospital medical waste, life rubbish, dead animals, the villages and towns of urban garbage disposal and so on various aspects non-hazardous wastes treatment equipment.
2. Simple and convenient operation, high burning temperature and burning of organic matter removal rate was 99%, Fast burning speed, effectively.Covers an area of small, low cost, low malfunction,easy maintenance.
1.Furnace body is made up of refractory materials, insulation materials, insulation materials, laying on the top of the cavity of grate outsourcing steel plate to prevent gas leakage and the furnace body surface temperature is less than 50 ºC.In the furnace body is equipped with the access door side, auxiliary ignition burner on the side, too.The furnace body is equipped with work station.
2.Flue gas in the chamber of a stove or furnace from the bottom to wash the material, the moisture in the material drying, make material on fire in time. And arch before and after the refractory material accumulation of heat and radiation, so as to ensure the material combustion temperature.Prolong the residence time of flue gas, make the material and fly ash in the organic matter complete combustion, increase the destruction rate of harmful substances.
3.Furnace body in high temperature refractory lining, insulating material, is among the outer layer is a thermal insulation material, can reduce furnace body heat loss, improve the efficiency of burning;Appearance using steel plate as a protective layer to prevent air leakage;The refractory is developed by our company and building materials science research institute an acidic gas corrosion resistant, high temperature resistant, high strength refractory materials.
1. Competitive price/reliable quality
2. Suitable for Medical Waste,Dead Animals,living garbage,etc.
3. High working efficiency
1. The incinerator Description
About the waste incinerator is a kind of machine with compact size, high burning efficiency, reasonable burning technology, high degree of non-harm etc, it is an ideal choice for waste treatment of hospital, hotels, various stations and industries.
2. About the incinerator equipment Advantages
1) Long lifetime
2) Totally enclosed operation
3) Suitable for treating infectious waste
4) Avoid secondary pollution
5) Simple operation
3. About the incinerator equipment Main features
1) Both gas-motivated and oil-motivated are all can be preferred according to customers' needs.
2) Gasified incineration is used for burning syringe, paper waste, bandage, absorbent cotton and other medical wastes.
3) Daily waste can be burned once by gasified incineration.
4) Gasified incineration, mixed incineration and burnout treatment ensures low emission standard of dust (lower than International standard).
5) Totally enclosed operation is suitable for treating infectious waste to avoid secondary pollution.
4. About the incinerator Application
Hospital, Station, Hotel, Farm,Shopping Mall, etc.---Soild waste (garbage, rubbish).
Incinerator operating process:
1.Turn on the power switch, the power indicator is on.
2.Open water pump, return pipe yielding water, turnon the oil circuit switch.
3.Open the incinerator furnace door,fill into the flaming material, small living garbage incinerator, then close the door.
4.Turn on the induced draft fan.
5. Turn on the burner ignition switch.
6.When burnt out, turn off the burner ignition switch.After the temperature dropped to 50 degrees,turn off the oil circuit switch,the induced draft fan and the water pump, shut off the main power supply, open the door, remove the residue, clean it.
Special instructions, the operating process are strictly prohibited under the condition of high temperature shut down the pump and the burner fan.
2. 100% low excess air coefficient, using vortex combustion process.
3. Low temperature control system design, operation cost is low, the use of cold heat exchanger cooling process can realize resource recycling.
4. Cover an small area , simple operation, convenient maintenance.
1.ZT series living garbage incinerator which is brought in the world's advanced incinerator technology by Weifang Zhite Environmental Protection Technology Co.,Ltd., and organize technical experts in research, development, developed with independent intellectual property rights of living garbage incineration equipment.
2.The device is fully enclosed, small volume, high burning efficiency, reasonable process, leading technology, high degree of harmless, etc, are all kinds of hospitals, hotels, railway stations, large commercial institutions, enterprises and institutions ideal garbage treatment equipment.
Company Brief Introduction:
Our company supplies different kinds of products. High quality and favorable price. We're pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of " Quality first, service first, continuous improvement and innovation to meet the customers" For the management and " Zero defect, zero complaints" As the quality objective.
Matters need attention
1.The incinerator need to be torrefaction for 36hours before use,can not with open fire.
2.The incinerator shell can only be cleaned with mixed liquor which is mixed by water and Detergent.
3. This equipment must be installed in a well-ventilated room, appliances and burner anti-collision moistureproof.
After sale service?
For most of the machines, the quality is guaranteed for one year since the date of shipment except wearing parts, we supply the on-line service for all the machines, and also supply the spare parts all the time with cost price, for some complicated machine or plant, we can send our engineer overseas too.
Packaging & Shipping
All the goods exported are packed in wooden case or carton with export standard except naked package when necessary.
We have our own professional shipping company which could deliver the goods to every corners in the world with safety and speed, and aslo can supply the services of solving the problems occured during the transaction, such as customs cleaning.
Why choose us :
1, Are you manufacturer?
Yes, we are manufacturer with more than 15 years' experience.
2,Can you ship the machine to my address?
Yes, we could use DHL to express the machine. While transport cost will be higher than by sea.
3, Where are you? Can we go to China and visit your factory?
Yes, of course. We are in Shandong, China. Welcome to our factory.
4, Do you have manual with the machine?
Yes, of course. It is in English version.
5, Can you offer us the necessary paper to do the customs clearance?
Yes, of course. We will send you the commercial invoice, sales contract,
packing list, bill of lading(FOB or CFR, CIF terms), insurance policy (if CIF terms), also CO if you need.
Our Main products:
4.Hospital use incinerator
11.Dead animal incinerator
12.medical waste incinerator
13.living garbage incinerator
14.crematorium the incinerator for cows
15.gabage treatment incinarator
16.medical waste diesel incinerator
17.solid waste incinerator
18.industrial incinerator factory
Weifang Zhite Environmental protection technology Co.,Ltd.
Address:Dongsi Road,Dongcheng development zone,Linqu,Weifang city,Shandong province,China.